#1 DVD Ripper 1.3.31 crack serial keygen

#1 DVD Ripper 1.3.31 crack serial keygen

Build Pass #1: Repo RPMs Produced cracklib-2.9.6-15.el8.x86_64.rpm cracklib-dicts-2.9.6-15.el8.x86_64.rpm crda-3.18_2018.05.31-3.el8.noarch.rpm. Method 1: Click the Restore Stock Defaults switch on the Advanced -panel that Ulead VideoStudio 11 Plus Serial Number + Crack Download incl activation. Leopard server serial numbers, cracks and keygens are presented here. No registration. Mac Os X Leopard Install Dvd 10.5.1 crack.

#1 DVD Ripper 1.3.31 crack serial keygen - not

View previous topic :: View next topic  
AuthorMessage
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 5:24 am    Post subject: CUPS and USB printerReply with quote

The printer is a Epson Stylus Photo R285 (supported, suggested driver gimp-print). When I try to add the printer (both via bowsero or kde's tool) cups doesn't give me the option for USB printer nor it show the gimp-print driver.

tail /var/log/cups/error_log says

Code:

I [13/May/2008:18:20:44 +0200] Loaded MIME database from '/etc/cups': 34 types, 38 filters...
I [13/May/2008:18:20:44 +0200] Loading job cache file "/var/cache/cups/job.cache"...
I [13/May/2008:18:20:44 +0200] Full reload complete.
I [13/May/2008:18:20:44 +0200] Listening to 127.0.0.1:631 on fd 2...
E [13/May/2008:18:20:44 +0200] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [13/May/2008:18:20:44 +0200] Listening to /var/run/cups/cups.sock on fd 3...
I [13/May/2008:18:20:54 +0200] commptr="1+0+4+requested-attributes=all"
I [13/May/2008:18:20:54 +0200] Started "/usr/libexec/cups/daemon/cups-deviced" (pid=1365)
I [13/May/2008:18:20:55 +0200] commptr="1+0+4+requested-attributes=all"
I [13/May/2008:18:20:55 +0200] Started "/usr/libexec/cups/daemon/cups-deviced" (pid=1376)


Code:
lsusb (with connected printer) says

Code:

Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0461:4d2e Primax Electronics, Ltd
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 04f2:b015 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04b8:0007 Seiko Epson Corp.
Bus 001 Device 001: ID 0000:0000


USB printer support is enabled in my kernel, along with the rest of usb devices (wich are working pretty fine). That " Unable to open listen socket for address ::1:631 - Address family not supported by protocol." puzzles me. Cups configuration file is standard, no changes applied.

Any Idea?
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Wed May 14, 2008 7:24 am    Post subject: Reply with quote

Please provide your "emerge --info" output, as well as the output of "emerge -pv cups".
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 7:28 am    Post subject: Reply with quote

emerge --info

Code:
Portage 2.1.4.4 (default-linux/x86/2007.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.24-gentoo-r3 i686)
=================================================================
System uname: 2.6.24-gentoo-r3 i686 Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
Timestamp of tree: Thu, 27 Mar 2008 15:45:04 +0000
app-shells/bash:     3.2_p17-r1
dev-java/java-config: 1.3.7, 2.1.4
dev-lang/python:     2.4.4-r9
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.9
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.61-r1
sys-devel/automake:  1.5, 1.7.9-r1, 1.9.6-r2, 1.10
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.unina.it/pub/linux/distributions/gentoo "
LANG="it_IT.UTF-8"
LC_ALL="it_IT.UTF-8"
LINGUAS="en it"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"

Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


emerge -pv cups

Code:
These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] net-print/cups-1.2.12-r6  USE="X dbus jpeg nls pam php png ppds ssl tiff -ldap -samba -slp" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB


I'm not using samba 'cos I have to manage only a printer connected directly via usb. I heard that older versions of cups required a usb flag, could this be my case?
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Wed May 14, 2008 7:35 am    Post subject: Reply with quote

The current cups ebuild doesn't have a usb USE flag, but who knows, it might be needed in one of the dependencies pulled in by cups in order to work properly. I have both usb and foomaticdb USE flags enabled on my system.

Edit: I have them both enabled globally, not per package. Just FYI.

The only difference on the USE flags on your cups and mine is that I don't have php enabled. But that shouldn't make any difference.

I know that the printer is showing up in your lsusb output, but how is it showing up in your dmesg output?
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 8:34 am    Post subject: Reply with quote

Well I think i'll try to enable those flags, anyway here is my full dmesg

Code:
Linux version 2.6.24-gentoo-r3 ([email protected]) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Tue Mar 25 20:49:17 CET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
 BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
 BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f82e0
Entering add_active_range(0, 0, 523984) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   523984
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   523984
On node 0 totalpages: 523984
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2301 pages used for memmap
  HighMem zone: 292307 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F8240, 0024 (r2 HP    )
ACPI: XSDT 7FED1B96, 007C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
ACPI: FACP 7FEDBC6C, 00F4 (r3 HP     30CC      6040000 ALAN        1)
ACPI: DSDT 7FED3071, 8B87 (r1 HP     30D2      6040000 INTL 20061109)
ACPI: FACS 7FEDEFC0, 0040
ACPI: HPET 7FEDBD60, 0038 (r1 HP     30D2      6040000 LOHR       5A)
ACPI: MCFG 7FEDBD98, 003C (r1 HP     30D2      6040000 LOHR       5A)
ACPI: TMOR 7FEDBDD4, 0026 (r1 HP     30CC      6040000 PTL         3)
ACPI: APIC 7FEDBDFA, 0068 (r1 HP     30D2      6040000  LTP        0)
ACPI: BOOT 7FEDBE62, 0028 (r1 HP     30D2      6040000  LTP        1)
ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
ACPI: SSDT 7FED2D94, 02DD (r1 HP     30D2         1000 INTL 20061109)
ACPI: SSDT 7FED2184, 025F (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED20DE, 00A6 (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED1C12, 04CC (r1  HP     30D2        3000 INTL 20061109)
ACPI: DMI detected: Hewlett-Packard
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0553000 soft=c0533000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.072 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069888k/2095936k available (3190k kernel code, 24764k reserved, 814k data, 256k init, 1178432k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe15000 - 0xfffff000   (1960 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04f0000 - 0xc0530000   ( 256 kB)
      .data : 0xc041da68 - 0xc04e9344   ( 814 kB)
      .text : 0xc0100000 - 0xc041da68   (3190 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet clockevent registered
Calibrating delay using timer specific routine.. 3993.23 BogoMIPS (lpj=19966186)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0554000 soft=c0534000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.95 BogoMIPS (lpj=19949756)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
Total of 2 processors activated (7983.18 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:[email protected] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: c4000000-c6ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 4000-7fff
  MEM window: f4000000-f7ffffff
  PREFETCH window: f0000000-f3ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 8000-bfff
  MEM window: bc000000-bfffffff
  PREFETCH window: c8000000-cbffffff
PCI: Bridge: 0000:00:1c.5
  IO window: c000-cfff
  MEM window: f8000000-f80fffff
  PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: f8100000-f81fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2467k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1210745110.949:1): initialized
highmem bounce pool size: 64 pages
squashfs: version 3.3 (2007/10/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Mar 25 2008 20:47:11) installed
Lock_Nolock (built Mar 25 2008 20:47:17) installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at  PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18
ICH8M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PIONEER DVDRW DVR-K17B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 256k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf8404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usb 2-4: new high speed USB device using ehci_hcd and address 3
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
usb 2-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: SynPS/2 Synaptics TouchPad as /class/input/input1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-2: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 4-2: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HP Optical USB Mobile Mouse as /class/input/input2
input: USB HID v11.10 Mouse [HP Optical USB Mobile Mouse] on usb-0000:00:1a.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 22
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8100000-f81007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00af2d8e00]
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar [email protected] port 0xf8404100 irq 219
ata2: SATA max UDMA/133 abar [email protected] port 0xf8404180 irq 219
ata3: SATA max UDMA/133 abar [email protected] port 0xf8404200 irq 219
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC32P, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  7401.600 MB/sec
xor: using function: pIII_sse (7401.600 MB/sec)
async_tx: api initialized (sync-only)
raid6: int32x1    770 MB/s
raid6: int32x2    758 MB/s
raid6: int32x4    641 MB/s
raid6: int32x8    580 MB/s
raid6: mmxx1     2555 MB/s
raid6: mmxx2     2731 MB/s
raid6: sse1x1    1730 MB/s
raid6: sse1x2    2105 MB/s
raid6: sse2x1    3087 MB/s
raid6: sse2x2    3250 MB/s
raid6: using algorithm sse2x2 (3250 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
input: PC Speaker as /class/input/input3
sd 0:0:0:0: Attached scsi generic sg0 type 0
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: RTL8101e at 0xf8956000, 00:1b:24:dd:b4:c1, XID 34200000 IRQ 218
ACPI: SSDT 7FED2A52, 027A (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED23E3, 05EA (r1  HP    30D2         3001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED2CCC, 00C8 (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED29CD, 0085 (r1  HP    30D2         3000 INTL 20061109)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 18
soundcore: exports duplicate symbol sound_class (owned by kernel)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input4
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [ACAD] (on-line)
Marking TSC unstable due to: possible TSC halt in C2.
ACPI: Power Button (FF) [PWRF]
ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126]
input: Power Button (CM) as /class/input/input5
Time: hpet clocksource has been installed.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xf8100800 irq 21 DMA
EXT3 FS on sda3, internal journal
Adding 16458584k swap on /dev/sda2.  Priority:-1 extents:1 across:16458584k
r8169: eth0: link down
r8169: eth0: link up
usb 2-2: new high speed USB device using ehci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 8:47 am    Post subject: Reply with quote

Sorry for duoble posti, but got a little problem

when emerge --update world I obtain this:

Code:
localhost ginko # emerge --newuse world
Calculating world dependencies... done!
>>> Verifying ebuild Manifests...

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


It means that the file is missing on my gentoo (and I need to re-emerge) or that the ebuild is missing. Sorry for asking stupid questions, but my linux experience is close to zero.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 12:49 pm    Post subject: Reply with quote

Kimmei wrote:
Sorry for duoble posti, but got a little problem

when emerge --update world I obtain this:

Code:
localhost ginko # emerge --newuse world
Calculating world dependencies... done!
>>> Verifying ebuild Manifests...

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


It means that the file is missing on my gentoo (and I need to re-emerge) or that the ebuild is missing. Sorry for asking stupid questions, but my linux experience is close to zero.


This simply means that at some point you had x11-libs/cairo/cairo-1.5.10 installed, but that specific version is no longer in portage.

You might try
Code:

emerge --update --newuse --deep world --ask
( emerge -uDN world -a )

That should offer to install (downgrade) to cairo-1.4.14. The emerge command as shown above may also offer to install other packages.
(BTW, You can control what version of a given package will be used via /etc/portage/package.keywords)[/quote]
Also, it is my practice to always use emerge -uDN world -a when I change a USE flag. That method has been working for me for years.
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 1:03 pm    Post subject: Reply with quote

emerge -uDN -a gives the same result and when I try opening /etc/portage/package.keywords I obatin a blank page (nothing at all in it).

Should I try emerging cairo-1.4.14 first and then retry emerge -uDN -a?
Back to top
View user's profileSend private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
PostPosted: Wed May 14, 2008 1:54 pm    Post subject: Reply with quote

Hi Kimmei,
I own an Epson stylus photo rx560.
I had problems too.
Do you have MSWindows on your box?
If so will it print in Windows?
The problem I had was that the printer will only work
when connected to the first usb port!
In WindowsXP it also refused to print if not connected to the first usb port.
I had to plug it into 6 different sockets to find the first.
Maybe this helps.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 2:12 pm    Post subject: Reply with quote

I used to have Vista on my laptop and get rid of it very happily. Anyway the printer worked fine both under vista and xp, no matter which usb port.

I'm confused because gentoo normally detects the usb printer, but cups dosn't even give me the option to select a usb printer... nor via it's standard driver, nor by gimp-print driver. I just followd the guide in the documentation.

For your problem I have very little to say. Do other usb devices work fine on the other ports?

If usb devices are running smoothly on all port than I guess the problem is the printer. If even storage keys and mouse have that problem the cause could be both software and hardware.

I think you can try connecting devices to various ports and the lsusb to see what is running where.
Back to top
View user's profileSend private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
PostPosted: Wed May 14, 2008 2:42 pm    Post subject: Reply with quote

The problem is the printer allright.
It's a combo.The scanner refuses to work unless on the first port.
All other ports work ok with cardreaders,webcams etc.
When I tried to install on windows I got the message that it should be
plugged into the first port.That's how I know.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 2:59 pm    Post subject: Reply with quote

Gerard van Vuuren wrote:
The problem is the printer allright.
It's a combo.The scanner refuses to work unless on the first port.
All other ports work ok with cardreaders,webcams etc.
When I tried to install on windows I got the message that it should be
plugged into the first port.That's how I know.
Gerard.


Well... I have no idea about why port 1 is ok and the other not.

My printer doesn't work under any port... tried with all 3 :cry: Anyway it's not a combo, but a standard 6 colors printer.
Back to top
View user's profileSend private message
tgurr
Retired Dev
Retired Dev


Joined: 27 Jan 2004
Posts: 571
Location: germany
PostPosted: Wed May 14, 2008 3:13 pm    Post subject: Reply with quote

Are you sure you've set CONFIG_USB_PRINTER=y in your kernel, of if compiled as a module ensured that it gets loaded on boot?
I wonder since your dmesg is missing a
Code:
usbcore: registered new interface driver usblp
line.
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 4:21 pm    Post subject: Reply with quote

tgurr wrote:
Are you sure you've set CONFIG_USB_PRINTER=y in your kernel, of if compiled as a module ensured that it gets loaded on boot?
I wonder since your dmesg is missing a
Code:
usbcore: registered new interface driver usblp
line.


USB printer support is put as built--in in my kernel

Code:
        *** USB Device Class drivers ***                                                                                     │ │
  │ │                                                    <M>   USB Modem (CDC ACM) support                                                                                          │ │
  │ │                                                    <*>   USB Printer support           


Built-in for my kernel or you meant adding the line to make.conf?

Another super-noob's question: how to check if the usb printer support is loaded at boot?
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 4:35 pm    Post subject: Reply with quote

It seems strange that emerge -uDN world did not offer to install cairo....

This Cairo issue is somewhat off topic of this thread (or it may apply - I do not know what cairo is or if it is related to usb or printing)

In any case, please

(esearch is obtained by: emerge esearch)
I would be interested in seeing the output of the esearch.
Also, there is nothing to stop you from emerging cairo
Code:

emerge --oneshot cairo

_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 5:13 pm    Post subject: Reply with quote

esearch :
Code:
*  dev-cpp/cairomm
      Latest version available: 1.4.4
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/
      Description: C++ bindings for the Cairo vector graphics library
      License:     GPL-2

*  dev-perl/Cairo
      Latest version available: 1.04.1
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://search.cpan.org/~tsch
      Description: Perl interface to the cairo library
      License:     LGPL-2.1

*  dev-python/pycairo
      Latest version available: 1.4.12
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/pycairo/
      Description: Python wrapper for cairo vector graphics library
      License:      / Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ( LGPL-2.1 MPL-1.1 )[/color]

*  x11-libs/libsvg-cairo
      Latest version available: 0.1.6
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org
      Description: Render SVG content using cairo
      License:     X11

*  x11-misc/cairo-clock [ Masked ]
      Latest version available: 0.3.3
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://macslow.thepimp.net/?page_id=23
      Description: An analog clock displaying the system-time.
      License:     GPL-2


emerge -uDN world -a

Code:
localhost ginko # emerge -uDN world -a
^[[A
These are the packages that would be merged, in order:

Calculating world dependencies... done!
[ebuild     UD] sys-apps/usbutils-0.72-r4 [0.73]
[ebuild  NS   ] app-text/docbook-sgml-dtd-4.4
[ebuild     U ] sys-process/procps-3.2.7 [3.2.6]
[ebuild     U ] sys-apps/less-418 [394]
[ebuild   R   ] media-fonts/ttf-bitstream-vera-1.10-r3  USE="X*"
[ebuild  N    ] app-doc/xorg-sgml-doctools-1.2
[ebuild   R   ] media-fonts/font-adobe-100dpi-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-adobe-utopia-type1-1.0.1  USE="X*"
[ebuild   R   ] media-fonts/font-adobe-75dpi-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-misc-misc-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-cursor-misc-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-bh-type1-1.0.0  USE="X*"
[ebuild   R   ] media-libs/gd-2.0.35  USE="jpeg* png*"
[ebuild   R   ] www-client/links-2.1_pre33  USE="jpeg* png* tiff*"
[ebuild  N    ] dev-java/antlr-2.7.7  USE="cxx doc java python source -debug -examples -mono -script"
[ebuild  N    ] dev-java/gjdoc-0.7.8  USE="source -xmldoclet"
[ebuild     U ] sys-apps/shadow-4.0.18.2 [4.0.18.1]
[ebuild   R   ] net-dns/libidn-1.0-r1  USE="doc* java*"
[ebuild     U ] sys-apps/grep-2.5.1a-r1 [2.5.1-r8] USE="pcre%*"
[ebuild     U ] app-editors/nano-2.0.7 [2.0.2]
[ebuild   R   ] dev-libs/cyrus-sasl-2.1.22-r2  USE="java*"
[ebuild     U ] app-arch/gzip-1.3.12-r1 [1.3.5-r10]
[ebuild     U ] sys-apps/net-tools-1.60-r13 [1.60-r12]
[ebuild     U ] sys-apps/kbd-1.13-r1 [1.12-r8]
[ebuild     U ] sys-apps/busybox-1.8.2 [1.2.2.1] USE="pam%* (-selinux)"
[ebuild     U ] sys-apps/gawk-3.1.5-r5 [3.1.5-r2]
[ebuild     U ] app-arch/tar-1.19-r1 [1.16-r2]
[ebuild     U ] sys-process/psmisc-22.6 [22.2] USE="X*"
[ebuild   R   ] net-im/centerim-4.22.2  USE="jpeg*"
[ebuild     U ] net-misc/openssh-4.7_p1-r3 [4.5_p1-r1] USE="X*"
[ebuild   R   ] app-doc/xorg-docs-1.4-r1  USE="doc*"
[ebuild     U ] net-misc/iputils-20070202 [20060512] USE="doc*"
[ebuild  N    ] virtual/editor-0
[ebuild   R   ] sys-devel/gcc-4.1.2  USE="gtk*"
[ebuild   R   ] x11-libs/cairo-1.4.12  USE="doc*"
[ebuild   R   ] dev-libs/atk-1.20.0  USE="doc*"
[ebuild  N    ] sys-auth/consolekit-0.2.3  USE="pam -debug"
[ebuild   R   ] dev-lang/swig-1.3.31  USE="doc* java* php*"
[ebuild   R   ] x11-apps/xinit-1.0.5-r1  USE="hal*"
[ebuild   R   ] x11-libs/qt-3.3.8-r4  USE="doc*"
[ebuild   R   ] x11-libs/qt-4.3.2-r1  USE="dbus* jpeg* png* tiff*"
[ebuild   R   ] app-text/ghostscript-gpl-8.61-r3  USE="gtk*"
[ebuild   R   ] media-libs/xine-lib-1.1.11  USE="gtk*"
[ebuild   R   ] www-client/mozilla-firefox-2.0.0.12  USE="java*"
[ebuild   R   ] app-crypt/pinentry-0.7.4-r1  USE="gtk*"
[ebuild   R   ] media-gfx/graphviz-2.16.1-r3  USE="gtk* jpeg* png*"
[ebuild   R   ] app-crypt/gnupg-2.0.7-r1  USE="doc*"
[ebuild   R   ] app-text/acroread-8.1.2-r1  USE="-nsplugin*"
[ebuild   R   ] app-office/openoffice-2.3.1-r1  USE="dbus* gtk*"
[ebuild     U ] sys-apps/baselayout-1.12.11.1 [1.12.9]
[ebuild     U ] sys-apps/module-init-tools-3.4 [3.2.2-r2] USE="-old-linux%"

Would you like toy' not understood. [Yes/No] yes
>>> Verifying ebuild Manifests...

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


emerge --oneshot cairo

Code:

localhost ginko # emerge --oneshot cairo
Calculating dependencies... done!
>>> Verifying ebuild Manifests...

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


How do I remove /usr/portage/x11.lib/cairo/cairo-1.5.10.ebuild from the Manifest so that I can emerge the older cesion of cairo and the update with newuse and all the rest?

Anyway I don't know if this has somenthig to do with the printer issue.... if not I apologize to the moderator for this messed up thread.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 6:09 pm    Post subject: Reply with quote

It would seem that getting this cairo thing straightened out is needed before getting to your real problem with usb and cups..

It should not be neccessary to manually muck around with stuff with /usr/portage. Emerge takes care of keep /usr/portage up to date and correct.

Looking at your messgaes and cmd outputs my guess is that somehow your /usr/portage has become a bit messed up. Perhaps a failed/partial emerge --sync. I don't know when you last did a sync, but I think now would be a good time to do so again.
Code:

emerge --sync
emerge -uDN world -a


On my system cairo is pulled in by
Code:

  x11-libs/cairo-1.4.14 pulled in by:
    app-office/openoffice-2.4.0
    app-text/poppler-bindings-0.6.3
    dev-cpp/cairomm-1.4.4
    dev-java/swt-3.3.1.1
    dev-python/pycairo-1.4.0
    gnome-base/librsvg-2.20.0
    media-gfx/graphviz-2.16.1-r4
    world
    www-client/mozilla-firefox-2.0.0.14
    x11-libs/gtk+-2.12.8
    x11-libs/pango-1.18.4

So whatever cairo is, it seems to be a fairly popular littlle guy.

Also I can see in your emerge -uDN world that emerge wants to recompile cairo
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Thu May 15, 2008 4:06 pm    Post subject: Reply with quote

Well emerge --sync and emerge -utDNv world solved the cairo issue. Sadly it wasn't related to the printer problem (sorry for the OT).


Any suggestion for my possessed cups?

Going to
Code:

emerge --unmerge cups
emerge --unmerge gimp-print
emerge -av cups
emerge -av gimp-print


and hope it will turn out fine.


Edit: a complete faliure
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Thu May 15, 2008 9:31 pm    Post subject: Reply with quote

Did you have both the usb and foomaticdb USE flags enabled globally when you updated world? If not, that would seem to be the next thing to try.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Thu May 15, 2008 11:32 pm    Post subject: Reply with quote

In your original post, you indicated that the printer was supported with gimp-print.

I assume you looked at openprinting.org, but you don't state that explicitly. You might look at
http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R285
(If that isn't what you have already looked at)
I only mention this because you said "gimp-print" and not "gutenprint"
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Fri May 16, 2008 2:15 pm    Post subject: Reply with quote

jfp wrote:
In your original post, you indicated that the printer was supported with gimp-print.

I assume you looked at openprinting.org, but you don't state that explicitly. You might look at
http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R285
(If that isn't what you have already looked at)
I only mention this because you said "gimp-print" and not "gutenprint"


Just made a little confusion with names, anyway I emerged gutenprit

@yabbadabbadont: got to check when'll be back home, but I knew that usb wasn't necessary anymore.
Back to top
View user's profileSend private message

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Источник: [https://torrent-igruha.org/3551-portal.html]
( LGPL-2.1 MPL-1.1 )

*  dev-ruby/rcairo
      Latest version available: 1.4.1
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org
      Description: Ruby bindings for cairo
      License:     Ruby

*  dev-scheme/guile-cairo [ Masked ]
      Latest version available: 1.4.0
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    home.gna.org/guile-cairo/
      Description: Wraps the Cairo graphics library for Guile Scheme
      License:     LGPL-2.1

*  gnustep-base/gnustep-back-cairo [ Masked ]
      Latest version available: 0.13.2
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://www.gnustep.org
      Description: Cairo back-end component for the GNUstep GUI Library.
      License:     LGPL-2.1

*  [color=red]x11-libs/cairo
      Latest version available: 1.4.12
      Latest version installed: 1.4.12
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/
      Description: A vector graphics library with cross-device output support
      License:     

Like: #1 DVD Ripper 1.3.31 crack serial keygen

COOL EDIT PRO 3.1 CRACK + SERIAL KEY FREE DOWNLOAD LATEST 2021
#1 DVD Ripper 1.3.31 crack serial keygen
#1 DVD Ripper 1.3.31 crack serial keygen
1ST UP MAIL SERVER 5.0.3 CRACK SERIAL KEYGEN
( LGPL-2.1 MPL-1.1 )

*  dev-ruby/rcairo
      Latest version available: 1.4.1
      Avast keygen,serial,crack,generator,unlock,key version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org
      Description: Ruby bindings for cairo
      License:     Ruby

*  dev-scheme/guile-cairo [ Masked ]
      Latest version available: 1.4.0
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    home.gna.org/guile-cairo/
      Description: Wraps the Cairo graphics library for Guile Scheme
      License:     LGPL-2.1

*  gnustep-base/gnustep-back-cairo [ Masked ]
      Latest version available: 0.13.2
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://www.gnustep.org
      Description: Cairo back-end component for the GNUstep GUI Library.
      License:     LGPL-2.1

*  [color=red]x11-libs/cairo
      Latest version available: 1.4.12
      Latest version installed: 1.4.12
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/
      Description: A vector graphics library with cross-device output support
      License:     
View previous topic :: View next topic  
AuthorMessage
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 5:24 am    Post subject: CUPS magic file v1 USB printerReply with quote

The printer is a Epson Stylus Photo R285 (supported, suggested driver gimp-print). When I try to add the printer (both via bowsero or kde's tool) cups doesn't give me the option for USB printer nor it show the gimp-print driver.

tail /var/log/cups/error_log says

Code:

I [13/May/2008:18:20:44 +0200] Loaded MIME database from '/etc/cups': 34 types, 38 filters.
I [13/May/2008:18:20:44 +0200] Loading job cache file "/var/cache/cups/job.cache".
I [13/May/2008:18:20:44 +0200] Full reload complete.
I [13/May/2008:18:20:44 +0200] Listening to 127.0.0.1:631 on fd 2.
E [13/May/2008:18:20:44 +0200] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [13/May/2008:18:20:44 +0200] Listening to /var/run/cups/cups.sock on fd 3.
I [13/May/2008:18:20:54 +0200] commptr="1+0+4+requested-attributes=all"
I [13/May/2008:18:20:54 +0200] Started "/usr/libexec/cups/daemon/cups-deviced" (pid=1365)
I [13/May/2008:18:20:55 +0200] commptr="1+0+4+requested-attributes=all"
I [13/May/2008:18:20:55 +0200] Started "/usr/libexec/cups/daemon/cups-deviced" (pid=1376)


Code:
lsusb (with connected printer) says

Code:

Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc, #1 DVD Ripper 1.3.31 crack serial keygen.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device Video Converter Archives - Kali Software Crack ID 0461:4d2e Primax Electronics, #1 DVD Ripper 1.3.31 crack serial keygen, Ltd
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 04f2:b015 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04b8:0007 Seiko Epson Corp.
Bus 001 Device 001: ID 0000:0000


USB printer support is enabled in my kernel, along with the rest of usb devices (wich are working pretty fine). That " Unable to open listen socket for address ::1:631 - Address family not supported by protocol." puzzles me. Cups configuration file is standard, no changes applied.

Any Idea?
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Wed May 14, 2008 7:24 am    Post subject: Reply with quote

Please provide your "emerge --info" output, as well as the output of "emerge -pv cups".
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 7:28 am    Post subject: Reply with quote

emerge --info

Code:
Portage 2.1.4.4 (default-linux/x86/2007.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.24-gentoo-r3 i686)
=================================================================
System uname: 2.6.24-gentoo-r3 i686 Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
Timestamp of tree: Thu, 27 Mar 2008 15:45:04 +0000
app-shells/bash:     3.2_p17-r1
dev-java/java-config: 1.3.7, 2.1.4
dev-lang/python:     2.4.4-r9
dev-python/pycrypto: 2.0.1-r6
Netflix - code et email crack serial keygen 1.12.9
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, #1 DVD Ripper 1.3.31 crack serial keygen, 2.61-r1
sys-devel/automake:  1.5, 1.7.9-r1, 1.9.6-r2, 1.10
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo #1 DVD Ripper 1.3.31 crack serial keygen
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://ftp.unina.it/pub/linux/distributions/gentoo "
LANG="it_IT.UTF-8"
LC_ALL="it_IT.UTF-8"
LINGUAS="en it"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"

Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


emerge -pv cups

Code:
These are the packages that would be merged, in order:

Calculating dependencies. done!
[ebuild   R   ] net-print/cups-1.2.12-r6  USE="X dbus jpeg nls pam php png ppds ssl tiff -ldap -samba -slp" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB


I'm not using samba 'cos I have to manage only a printer connected directly via usb. I heard that older versions of cups required a usb flag, could this be my case?
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Wed May 14, 2008 7:35 am    Post subject: Reply with quote

The current cups ebuild doesn't have a usb USE flag, but who knows, it might be needed in one of the dependencies pulled in by cups in order to work properly. I have both usb and foomaticdb USE flags enabled on my system.

Edit: I have them both enabled globally, not per package. Just FYI.

The only difference on the USE flags on your cups and mine is that I don't have php enabled. But that shouldn't make any difference.

I know that the printer is showing up in your lsusb output, but how is it showing up in your dmesg output?
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 8:34 am    Post subject: Reply with quote

Well I think i'll try to enable those flags, anyway here is my full dmesg

Code:
Linux version 2.6.24-gentoo-r3 ([email protected]) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Tue Mar 25 20:49:17 CET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
 BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
 BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f82e0
Entering add_active_range(0, 0, 523984) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   523984
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   523984
On node 0 totalpages: 523984
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, #1 DVD Ripper 1.3.31 crack serial keygen, LIFO batch:31
  HighMem zone: 2301 pages used for memmap
  HighMem zone: 292307 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F8240, 0024 (r2 HP    )
ACPI: XSDT 7FED1B96, 007C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
ACPI: FACP 7FEDBC6C, 00F4 (r3 HP     30CC      6040000 ALAN        1)
ACPI: DSDT 7FED3071, 8B87 (r1 HP     30D2      6040000 INTL 20061109)
ACPI: FACS 7FEDEFC0, 0040
ACPI: HPET 7FEDBD60, 0038 (r1 HP     30D2      6040000 LOHR       5A)
ACPI: MCFG 7FEDBD98, 003C (r1 HP     30D2      6040000 LOHR       5A)
ACPI: TMOR 7FEDBDD4, 0026 (r1 HP     30CC      6040000 PTL         3)
ACPI: APIC 7FEDBDFA, 0068 (r1 HP     30D2      6040000  LTP        0)
ACPI: BOOT 7FEDBE62, 0028 (r1 HP     30D2      6040000  LTP        1)
ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
ACPI: SSDT 7FED2D94, 02DD (r1 HP     30D2         1000 INTL 20061109)
ACPI: SSDT 7FED2184, 025F (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED20DE, 00A6 (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED1C12, 04CC (r1  HP     30D2        3000 INTL 20061109)
ACPI: DMI detected: Hewlett-Packard
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, #1 DVD Ripper 1.3.31 crack serial keygen, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus #1 DVD Ripper 1.3.31 crack serial keygen bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore. done.
Enabling unmasked #1 DVD Ripper 1.3.31 crack serial keygen FPU exception support. done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0553000 soft=c0533000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.072 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, #1 DVD Ripper 1.3.31 crack serial keygen, 262144 bytes)
Memory: 2069888k/2095936k available (3190k kernel code, 24764k reserved, 814k data, 256k init, 1178432k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe15000 - 0xfffff000   (1960 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04f0000 - 0xc0530000   ( 256 kB)
      .data : 0xc041da68 - 0xc04e9344   ( 814 kB)
      .text : 0xc0100000 - 0xc041da68   (3190 kB)
Checking if this processor honours the WP bit even in supervisor mode. Ok.
hpet clockevent registered
Calibrating delay using timer specific routine. 3993.23 BogoMIPS (lpj=19966186)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction. OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0554000 soft=c0534000
Initializing CPU#1
Calibrating delay using timer specific routine. 3989.95 BogoMIPS (lpj=19949756)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
Total of 2 processors activated (7983.18 BogoMIPS).
ENABLING IO-APIC IRQs
.TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed, #1 DVD Ripper 1.3.31 crack serial keygen.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: #1 DVD Ripper 1.3.31 crack serial keygen 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Microsoft Office Professional 2010 Product Key Full Crack [Latest Version]2021 PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:[email protected] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: c4000000-c6ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 4000-7fff
  MEM window: f4000000-f7ffffff
  PREFETCH window: f0000000-f3ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 8000-bfff
  MEM window: bc000000-bfffffff
  PREFETCH window: c8000000-cbffffff
PCI: Bridge: 0000:00:1c.5
  IO window: c000-cfff
  MEM window: f8000000-f80fffff
  PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: f8100000-f81fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, #1 DVD Ripper 1.3.31 crack serial keygen, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency #1 DVD Ripper 1.3.31 crack serial keygen of device #1 DVD Ripper 1.3.31 crack serial keygen to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs. it is
Freeing initrd memory: 2467k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink #1 DVD Ripper 1.3.31 crack serial keygen (disabled)
audit(1210745110.949:1): initialized
highmem bounce pool size: 64 pages
squashfs: version #1 DVD Ripper 1.3.31 crack serial keygen (2007/10/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Mar 25 #1 DVD Ripper 1.3.31 crack serial keygen 20:47:11) installed
Lock_Nolock (built Mar 25 2008 20:47:17) installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found #1 DVD Ripper 1.3.31 crack serial keygen capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
isapnp: Scanning for PnP cards.
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at  PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18
ICH8M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0.
hda: PIONEER DVDRW DVR-K17B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1.
Probing IDE interface ide1., #1 DVD Ripper 1.3.31 crack serial keygen.
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache
Uniform #1 DVD Ripper 1.3.31 crack serial keygen driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
#1 DVD Ripper 1.3.31 crack serial keygen PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 256k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, #1 DVD Ripper 1.3.31 crack serial keygen, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb #1 DVD Ripper 1.3.31 crack serial keygen configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf8404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, #1 DVD Ripper 1.3.31 crack serial keygen, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver.
usb 2-4: new high speed USB device using ehci_hcd and address 3
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
usb 2-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: SynPS/2 Synaptics TouchPad as /class/input/input1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, #1 DVD Ripper 1.3.31 crack serial keygen, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-2: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 4-2: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usbcore: DMCA/Copyrights | Pirate PC new interface driver hiddev
input: HP Optical USB Mobile Mouse as /class/input/input2
input: USB HID v11.10 Mouse [HP Optical USB Mobile Mouse] on usb-0000:00:1a.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 22
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8100000-f81007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00af2d8e00]
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar [email protected] port 0xf8404100 irq 219
ata2: SATA max UDMA/133 abar [email protected] port 0xf8404180 irq 219
ata3: SATA max UDMA/133 abar [email protected] port 0xf8404200 irq 219
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC32P, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, #1 DVD Ripper 1.3.31 crack serial keygen, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  7401.600 MB/sec
xor: using function: pIII_sse (7401.600 MB/sec)
async_tx: api initialized (sync-only)
raid6: int32x1    770 MB/s
raid6: int32x2    758 MB/s
raid6: int32x4    641 MB/s
raid6: int32x8    580 MB/s
raid6: mmxx1     2555 MB/s
raid6: mmxx2     2731 MB/s
raid6: sse1x1    1730 MB/s
raid6: sse1x2    2105 MB/s
raid6: sse2x1    3087 MB/s
raid6: sse2x2    3250 MB/s
raid6: using algorithm sse2x2 (3250 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10 Pepakura 4.0.2 keygen,serial,crack,generator,unlock JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
input: PC Speaker as /class/input/input3
sd 0:0:0:0: Attached scsi generic sg0 type 0
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: RTL8101e at 0xf8956000, 00:1b:24:dd:b4:c1, XID 34200000 IRQ 218
ACPI: SSDT 7FED2A52, 027A Trainz Simulator 2010 Engineers Edition crack serial keygen HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED23E3, 05EA (r1  HP    30D2         3001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED2CCC, 00C8 (r1  HP    30D2         3000 INTL 20061109)
ACPI: SSDT 7FED29CD, 0085 (r1  HP    30D2         3000 INTL 20061109)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 18
soundcore: exports duplicate symbol sound_class (owned by kernel)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input4
ACPI: PCI Interrupt 0000:00:1b.0[A] IZotope Ozone Advanced 9.0.1 With Crack [Latest] GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [ACAD] (on-line)
Marking TSC unstable due to: possible TSC halt in C2, #1 DVD Ripper 1.3.31 crack serial keygen.
ACPI: Power Button (FF) [PWRF]
ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126]
input: Power Button (CM) as /class/input/input5
Time: hpet clocksource has been installed.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xf8100800 irq 21 DMA
EXT3 FS on sda3, internal journal
Adding 16458584k swap on /dev/sda2.  Priority:-1 extents:1 across:16458584k
r8169: eth0: link down
r8169: eth0: link up
usb 2-2: new high speed USB device using ehci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 8:47 am    Post subject: Reply with quote

Sorry for duoble posti, but got a little problem

when emerge --update world I obtain this:

Code:
localhost ginko # emerge --newuse world
Calculating world dependencies. done!
>>> Verifying ebuild Manifests.

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


It means that the file is missing on my gentoo (and I need to re-emerge) or that the ebuild is missing. Sorry for asking stupid questions, but my linux experience is close to zero.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 12:49 pm    Post subject: Reply with quote

Kimmei wrote:
Sorry for duoble posti, but got a little problem

when emerge --update world I obtain this:

Code:
localhost ginko # emerge --newuse world
Calculating world dependencies. done!
>>> Verifying ebuild Manifests.

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


It means that the file is missing on my gentoo (and I need to re-emerge) or that the ebuild is missing. Sorry for asking stupid questions, but my linux experience is close to zero.


This simply means that at some point you had x11-libs/cairo/cairo-1.5.10 installed, but that specific version is no longer in portage.

You might try
Code:

emerge --update --newuse --deep world --ask
( emerge -uDN world -a )

That should offer to install (downgrade) to cairo-1.4.14. The emerge command as shown above may also offer to install other packages.
(BTW, You can control what version of a given package will be used via /etc/portage/package.keywords)[/quote]
Also, it is my practice to always use emerge -uDN world -a when I change a USE flag. That method has been working for me for years.
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 1:03 pm    Post subject: Reply with quote

emerge -uDN -a gives the same result and when I try opening /etc/portage/package.keywords I obatin a blank page (nothing at all in it).

Should I try emerging cairo-1.4.14 first and then retry emerge -uDN -a?
Back to top
View user's profileSend private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
PostPosted: Wed May 14, 2008 1:54 pm    Post subject: Reply with quote

Hi Kimmei,
I own an Epson stylus photo rx560.
I had problems too.
Do you have MSWindows on your box?
If so will it print in Windows?
The problem I had was that the printer will only work
when connected to the first usb port!
In WindowsXP it also refused to print if not connected to the first usb port.
I had to plug it into 6 different sockets to find the first.
Maybe this helps.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 2:12 pm    Post subject: Reply with quote

I used to have Vista on my laptop and get rid of it very happily. Anyway the printer worked fine both under vista and xp, no matter which usb port.

I'm confused because gentoo normally detects the usb printer, but cups dosn't even give me the option to select a usb printer. nor via it's standard driver, nor by gimp-print driver. I just 1 Privacy Eraser v 2.0 crack serial keygen the guide in the documentation.

For your problem I have very little to say. Do other usb devices work fine on the other ports?

If usb devices are running smoothly on all port than I guess the problem is the printer. If even storage keys and mouse have that problem the cause could be both software and hardware.

I think you can try connecting devices to various ports and the lsusb to see what is running where.
Back to top
View user's profileSend private message
gerard27
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2377
Location: Netherlands
PostPosted: Wed May 14, 2008 2:42 pm    Post subject: Reply with quote

The problem is the printer allright.
It's a combo.The scanner refuses to work unless #1 DVD Ripper 1.3.31 crack serial keygen the first port.
All other ports work ok with cardreaders,webcams etc.
When I tried to install on windows I got the message that it should be
plugged into the first port.That's how I know.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 2:59 pm    Post subject: Reply with quote

Gerard van Vuuren wrote:
The problem is the printer allright.
It's a combo.The scanner refuses to work unless on the first port.
All other ports work ok with cardreaders,webcams etc.
When I tried to install on windows I got the message that it should be
plugged into the first port.That's how I know.
Gerard.


Well. I have no idea about why port 1 is ok and the other not.

My printer doesn't work under any port. tried with all 3 :cry: Anyway it's not a combo, but a standard 6 colors printer.
Back to top
View user's profileSend private message
tgurr
Retired Dev
Retired Dev


Joined: 27 Jan 2004
Posts: 571
Location: germany
PostPosted: Wed May 14, 2008 3:13 pm    Post subject: Reply with quote

Are you sure you've set CONFIG_USB_PRINTER=y in your kernel, of if compiled as a module ensured that it gets loaded on boot?
I wonder since your dmesg is missing a
Code:
usbcore: registered new interface driver usblp
line.
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 4:21 pm    Post subject: Reply with quote

tgurr wrote:
Are you sure you've set CONFIG_USB_PRINTER=y in your kernel, of if compiled as a module ensured that it gets loaded on boot?
I wonder since your dmesg is missing a
Code:
usbcore: registered new interface driver usblp
line.


USB printer support is put as built--in in my kernel

Code:
        *** USB Device Class drivers ***                                                                                     │ │
  │ │                                                    <M>   USB Modem (CDC ACM) support                                                                                          │ │
  │ │                #1 DVD Ripper 1.3.31 crack serial keygen                                   <*>   USB Printer support           


Built-in for my kernel or you meant adding the line to make.conf?

Another super-noob's question: how to check if the usb printer support is loaded at boot?
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 4:35 pm    Post subject: Reply with quote

It seems strange that emerge -uDN world did not offer to install cairo.

This Cairo issue is somewhat off topic of this thread (or it may apply - I do not know what cairo is or if it is related to usb BatchPhoto Pro 4.1.1 crack serial keygen printing)

In any case, please

(esearch is #1 DVD Ripper 1.3.31 crack serial keygen by: emerge esearch)
I would be interested in seeing the output of the esearch, #1 DVD Ripper 1.3.31 crack serial keygen.
Also, there is nothing to stop you from emerging cairo
Code:

emerge --oneshot cairo

_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Wed May 14, 2008 5:13 pm    Post subject: Reply with quote

esearch :
Code:
*  dev-cpp/cairomm
      Latest version available: 1.4.4
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/
      Description: C++ bindings for the Cairo vector graphics library
      License:     GPL-2

*  dev-perl/Cairo
      Latest version available: 1.04.1
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://search.cpan.org/~tsch
      Description: Perl interface to the cairo library
      License:     LGPL-2.1

*  dev-python/pycairo
      Latest version available: 1.4.12
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org/pycairo/
      Description: Python wrapper for cairo vector graphics library
      License:      Arioch

/srv/irclogs.ubuntu.com/2005/03/21/#ubuntu.txt

error_29excellent, mlambie- thank you!12:00
=== Ivy6Quaff [[email protected]] has joined #ubuntu
nu2ubuntushould I report the problem with my non-ejecting drive to bugzilla?12:00
thoreauputicnu2ubuntu: sounds like it :(12:00
nu2ubuntuok, thanks!12:01
subliminakithoreauputic: i'm using hoary12:01
ShadowRageermo: will ubuntu work on a 166 mhz compaq with O&O Defrag 19 Pro Full Version Download mb of ram?12:01
thoreauputicsubliminaki: ah, then I can't help: sorry12:01
subliminaki:(12:01
subliminakibut is not the same on gnome?12:01
=== txz [[email protected]] has joined #ubuntu
thoreauputicsubliminaki: I believe they are working on it, if it's any consolation12:02
mlambieummm. since when did ubuntu support sparc?12:02
subliminakiok :)12:02
thoreauputicmlambie: ?12:02
mlambiehttp://au.archive.ubuntu.com/ubuntu/dists/hoary/Release12:02
mlambielisted as an architecture12:02
=== tsume_ [[email protected]] has left #ubuntu []
thoreauputicmlambie: indeed -  interesting12:03
mlambievery12:03
=== obiwan [[email protected]] has joined #ubuntu
=== apple_ [[email protected]] has joined #ubuntu
=== gaussian88 [[email protected]] has joined #Ubuntu
thoreauputicmlambie: you might ask on the developers mailing list12:04
=== Eno_ [[email protected]] has joined #ubuntu
=== potsed [[email protected]] has joined #ubuntu
potsedhi 8] 12:06
=== will [[email protected]] has joined #ubuntu
=== william [[email protected]] has joined #ubuntu
=== william [[email protected]] has left #ubuntu ["Leaving"]
=== kez [[email protected]] has joined #ubuntu
=== snoop_ [[email protected]] has joined #ubuntu
potsedi am trying to install php4 but get the following errors php4: Depends: libmm13 but it is not installable        Depends: apache-common (>= 1.3.31) but it is not installable, i have apache-common2 installed.12:08
=== ewhitten [[email protected]] has joined #ubuntu
potsedi a a noob at this so plz help.thx12:08
ewhittenevenin :)12:08
snoop_ewhitten: evenin12:10
Eno_i have onboard sound (snd-cmipci) but i want to use my audigy (snd-emu10k1). i have this in my /etc/modutils/aliases "alias snd-card-0 snd_emu10k1", "options snd_emu10k1 index=0", "alias snd-card-1 snd_cmipci", and "options snd_cmipci index=1", but alsamixer still reports cmipci and  i have no sound.12:10
=== ub99 [[email protected]] has joined #ubuntu
ub99hi12:11
=== Gman_ [[email protected]] has joined #ubuntu
=== iGN [[email protected]] has joined #ubuntu
ub99how can i install an ubuntu base with XFCE ?12:11
iGNHey, ubuntu-people.12:11
iGNHow do I get rid of that problem with kacpid running wild? Can I turn it off when I boot? I already reniced the process to 19.12:12
iGN(Everything else rocks, tho, thanks a bunch.)12:12
bob2isn't that a kernel thread?12:12
thoreauputicShadowRage: from the Ubuntu PPC CD sleeve: PPC ubuntu runs on G3, G4, G5 minimum RAM 32MB, #1 DVD Ripper 1.3.31 crack serial keygen, absolute minimum hard disk space for minimal install 350MB12:12
iGNHm, I think #1 DVD Ripper 1.3.31 crack serial keygen might be.12:12
snoop_ub99: i suppose you can install ubuntu, then use apt-get to get xfce and use it.12:12
bob2the only way to get rid of it then is to not load the acpi modules12:12
iGNIt constantly hogs 98.9% CPU.12:13
iGNIs there a simple way of not loading ACPI-modules at boot-time?12:13
iGNI'm used to LILO, see. :)12:13
ub99snoop_, but i dont want gnome and other standard applications. as i dont have much harddisk space.12:13
=== viper12 [[email protected]] has joined #ubuntu
dazedthoreauputic: how can i update to Hoary from warty?12:13
=== HiddenWolf [[email protected]] has joined #ubuntu
snoop_ub99: hmm.if you have enough space, initially install then get rid of it.otherwise.12:14
thoreauputicdazed: change all instances of "warty" to "hoary" in /etc/apt/sources.listsudo apt-get update && sudo apt-get dist-upgrade12:15
=== det [[email protected]] has joined #ubuntu
=== wdh [[email protected]] has joined #ubuntu
dazedokie doke12:15
snoop_ub99: yea.cant really think of anything else.anyone else have any ideas?12:15
detIs it possible to have a IA32 chroot under AMD64 ubuntu?12:15
mjrdet, #1 DVD Ripper 1.3.31 crack serial keygen, yes12:15
ShadowRagethoreauputic: I have 176 mb #1 DVD Ripper 1.3.31 crack serial keygen ram12:16
mjrI have one12:16
mjr(the chroot is actually debian sid, for various reasons)12:16
Eno_how can i get it to not load snd-cmipci, and using my emu10k1 instead?12:16
thoreauputicShadowRage: OK, well, I just thought that info from the CD cover might be useful12:16
ShadowRagethoreauputic: how well would t play with anything older than a g3?12:16
error_29man, firefox loads so slowly now I'm thinking of installing mozilla12:16
=== jesuel [[email protected]] has joined #ubuntu
ShadowRagewould it*12:16
ShadowRage604 PPC cpu12:17
=== Cayu [[email protected]] has joined #ubuntu
thoreauputicShadowRage: sorry. I have no idea (I have #1 DVD Ripper 1.3.31 crack serial keygen iBook G4 )12:17
=== ewhitten [[email protected]] has left #ubuntu []
viper12slowly error_29 ?12:17
=== Cayu [[email protected]] has left #ubuntu []
ShadowRagethoreauputic: how much space does ubuntu take up on the HDD?12:18
ShadowRageand does it come with xfce 4.2?12:18
jesuelmmm i love my university internet connection lol :)12:18
=== wasabi_ [[email protected]] has joined #ubuntu
error_29hmm, weird.  from the panel icon, firefox takes forever.  From terminal, it's instant.12:18
thoreauputicShadowRage: default install about 1.7 Gigand no, not by default12:18
=== ShadowRage is on a pathetic 56k connection ._.
wasabi_zenrox, put the HD in, boot with the #1 DVD Ripper 1.3.31 crack serial keygen cd, fix it up, then boot it.12:18
jesuelShadowRage: heh  :)12:18
dazedthoreauputic: some repositories return errors such as cant be found is there a direct copy and past i could snag?12:19
wasabi_zenwhen,put the HD in, #1 DVD Ripper 1.3.31 crack serial keygen, boot with the live cd, #1 DVD Ripper 1.3.31 crack serial keygen, fix it up, then boot it.12:19
viper12ShadowRage,  I installed xfce 4.2 though and it works just fine.12:19
error_29funny how ubuntu seems to have assigned the command "mozilla" to firefox, also12:19
thoreauputicdazed: I'm on warty12:19
zenwhenOh12:19
dazedoh lol12:19
ShadowRagek12:19
zenwhenwasabi_, you mean chroot into the install form the livecd?12:19
zenwhenI hadnt thought of that.12:19
zenwhenThanks.12:19
error_29xfce 4.2 is pretty cool.12:20
=== ShadowRage just continues fucking with debianpcc
ShadowRageppc*12:20
zenwhenI use it on my lpatop12:20
zenwhenlaptop12:20
Eno_how can i change my primary sound card?12:20
=== ShadowRage wants to make a linux distro
viper12I still prefer gnome, #1 DVD Ripper 1.3.31 crack serial keygen, but xfce is light fast and easy on the eyes.12:20
zenwhenWhen I get around to using my laptop12:20
=== saif [[email protected]] has joined #ubuntu
saifhello every112:21
snoop_saif: hello12:21
error_29I'm having trouble distinguishing my gnome problems from my nautilus problems and my metacity problems.  So, I think I'll just hope for improvements One Piece: Netflix divulga imagens INÉDITAS do live-action general12:21
saifi am having some problem connecting to ubuntu, #1 DVD Ripper 1.3.31 crack serial keygen, i enter my user name and password then i get this error message saying that gdm could not write to my authorization file!12:22
detmjr, I can't have a Hoary chroot?12:23
thoreauputicsaif: just a guess - you ran a graphical app as root and your ~/.ICEauthority file is now root:root instead of saif:saif12:23
saifit says either the disk is full or my  home directory could not be opened! what i do?! any ideas?12:23
mjrdet, of course you can12:24
=== heero [[email protected]] has joined #ubuntu
saifthoreauputic: well, the last i remember is i was installing apache2, but anyways, let's consider ur are right, what is the solution to this/??12:24
heeroanyone know how, run a service in the boot of ubuntu?12:25
mjrI just wanted a sid install to play with for other reasons12:25
=== Eno_ [[email protected]] has left #ubuntu ["Leaving"]
thoreauputicsaif: from a terminal, run ls -l ~/.ICEauthority   If the file, as I suspect, is owned by root, delete it and try logging in again12:25
heeroanyone know how, run a service in the boot of ubuntu??12:25
thoreauputicheero: look at the manual for update-rc.d12:26
saifthoreauputic: -rw-r--r-x saif saif :(12:27
saifthoreauputic: delete it anyways?12:27
detmjr, ahh, ok12:27
thoreauputicsaif: it should be just rw for the owner (you in this case)12:28
thoreauputictry deleting it, yeah12:28
=== kez is now known as kez-in-bed
thoreauputicsaif: mine is     -rw-------    1 peter    peter12:29
=== quarupt [[email protected]] has joined #ubuntu
thoreauputicsaif: but I don't know if that will help (odd permissions, #1 DVD Ripper 1.3.31 crack serial keygen, though)12:29
ermo*grr* what's the point in having a bugzilla if it doesn't work?!?12:29
viper12well it does live up to its name that way huh?  heh heh. :D12:30
=== LordC [[email protected]] has joined #ubuntu
ShadowRageONOES IT'S BUGZILLA *cue giant insect*12:30
thoreauputicviper12: catch 22, #1 DVD Ripper 1.3.31 crack serial keygen, trying to report a bugzilla bug on a non-working bugzilla ;)12:31
saifthoreauputic: yippi yey!! it worked! thanx alot man!12:31
viper12thoreauputic:  lmao.12:31
thoreauputicsaif: you're welcome :)12:31
viper12there's gotta be a movie script in there somewhere.  ;)12:31
ermovincent, it's just, well, I just wasted 30 minutes trying to do the 'noble' thing. And then I'm not allowed to enter a bug because the 'package' field is broken *but required*12:31
ermoviper12, sorry12:32
ermoI'm emailing it instead.12:32
viper12lmao.why do people call me vincent sometimes?  yer not the first.looks around confusticated.  ;)12:32
thoreauputicermo: post it on the user's list :)12:32
=== orospakr [[email protected]] has joined #ubuntu
quarupthowcome when i type vncviewer into the prompt and a box pops up i type in the ip and press enter, and nothing happens?12:32
thoreauputicviper12: automatic tab completion ?12:32
ermoviper12, because tab-completion calls up vincent #1, viper12 #212:32
viper12prolly12:32
viper12lmao.12:32
ermothoreauputic, is there any way I can post it there without subscribing? (I absolutely loathe mailing-lists - hail gmane)12:33
quaruptis there a vnc viewer in the menus somewhere?12:33
viper12applications>intenet> terminal server client12:35
=== pepsi [[email protected]] #1 DVD Ripper 1.3.31 crack serial keygen has joined #ubuntu
viper12pick your poison from there.12:35
=== aya [[email protected]] has joined #ubuntu
=== stub [[email protected]] has joined #ubuntu
=== BuffaloSoldier [[email protected]] has joined #ubuntu
thoreauputicermo: I think it's possible - check the lists page at lists.ubuntu.com (that url is from memory)12:36
=== seb128 [[email protected]] has left #ubuntu ["I]
quarupthrm, i put the ip and nothing happened, it wants login and p[ass, but there is no login just a password12:37
=== BuffaloSoldier [[email protected]] has left #ubuntu ["Leaving"]
=== zerovertex [[email protected]] has joined #ubuntu
ermothoreauputic, Sorry. Just needed to vent some steam. I'll look into it.12:37
Xappehmm, i'm on an ibook and have to modify the keymap so that I can use the apple keys as <alt gr>. they seems to be unmapped with my swedish configuration. how do I change this?12:37
=== mkp [[email protected]] has joined #ubuntu
=== ke-afk is now known as kerskine
=== mumak [[email protected]] has joined #ubuntu
ub99pls help12:38
thoreauputicub99: with what?12:39
=== ShadowRage [[email protected]] has left #ubuntu [""Knowledge]
=== drspin [[email protected]] has joined #Ubuntu
=== drspin [[email protected]] has left #Ubuntu []
ub99thoreauputic, my netboot install doesnt work.12:40
dazedhey does anyone know how to make the keys on my keyboard control the volume?12:40
crypticreignwhat the heck happened to the mark as read in evolution12:40
=== Flik [[email protected]] has joined #ubuntu
ub99thoreauputic, it cant connect to the deb mirrors.12:40
=== gaussian88 [[email protected]] has left #Ubuntu []
thoreauputicub99: umm.  deb mirrors?12:41
=== nerk [[email protected]] has joined #ubuntu
=== mario [[email protected]] has joined #ubuntu
ub99thoreauputic, yeah those in sources.list12:41
=== picole [[email protected]] has joined #ubuntu
nerkHi, anyone know if there is a grapical theme builder app for gnome themes?12:41
quaruptis there some way to get someone's ip while your talking to em in msn?12:42
ub99thoreauputic, i m trying to install as described in http://www.wrigley.me.uk/wp/?p=7112:42
=== frankenstein [[email protected]] has joined #ubuntu
nerkhttp://packages.debian.org/stable/x11/sawfish-themer <-- Yah, something like that but for gnome12:43
thoreauputicub99: I don't know about netboot installs, and I've never seen that howto before, sorry12:44
frankensteinheelo all12:44
frankensteinhello *12:44
frankenstein:)12:44
snoop_;)12:44
=== ubuntu [[email protected]] has joined #ubuntu
=== wdh [[email protected]] has joined #ubuntu
=== scorpix_ [[email protected]] has joined #ubuntu
thoreauputicub99: maybe you could mail the author with good error messages and an explanation of how you tried to do it12:45
ub99i ve done as described .12:45
frankensteinI am looking for a quick simple distro for a file server I have a sw based raid5 with lvm2 on top of this the machine I am moving it into is a 233mhz with 512mb ram can ubunto fit this bill I have been googling and it keeps coming up12:45
ub99thoreauputic, do only end-user meet here? i mean no developper at all here?12:46
mlambieub99: you'll see canonical people here occasionally.12:46
frankensteinI had this raid in my desktop running gentoo but now am wanting too move it to this other machine and do not want to spend a week getting gentoo up if you know what I mean12:46
thoreauputicub99: I notice the blog has a comments field - use that And yes, some developers are here at various times12:46
orospakrhi!  I can't enable DMA on my k8t800 motherbord's PATA ports with ubuntu-amd64.  (hdparm -d1 returns operation not permitted)12:46
snoop_frankenstein: hmm.well i believe it was made more for desktops, but if you cut the fat.yeah #1 DVD Ripper 1.3.31 crack serial keygen gentoo's good  for that kinda stuff.how's about slack?12:47
ub99There should be a real netinstall pkg / howto out there!12:48
ub99i mean an official one12:48
=== obiwan [[email protected]] has left #ubuntu ["Abandonando"]
=== jpaine [[email protected]] has joined #ubuntu
frankensteinsnoop_, I was looking at slack but kept seeing ubunto come up in my google journeys and thought I would explore abit :)12:48
thoreauputicub99: write to the users list or file a bug12:48
snoop_frankenstein: yeah.ubuntu is a really good distro12:49
jpainehow can I get a kernel like in the live cd? can I use fb to get good resolution console text???12:49
ub99ok thx thoreauputic i just try out QEMU netinstall maybe it works with it.12:49
ub99cu all12:49
ub99gn812:49
snoop_frankenstein: but for servers i would say gentoo, slack or some gui light distro.12:49
=== ub99 [[email protected]] has left #ubuntu []
=== ermo wonders how snoop_ managed to leave out debian
=== Lemonzest [[email protected]] has joined #ubuntu
frankensteinit is more geared at the desktop though I gues a straight slack or debian would be aok I was kinda looking for something designed to do this outta the box with a 15 minute or less install samba nfs capabilities and still all the lovely features of sw raid and LVM :)12:50
snoop_of course.12:50
frankensteinlormalinux seems close12:50
snoop_how #1 DVD Ripper 1.3.31 crack serial keygen i not mention the mother of all distros.12:51
ermosnoop_, =] 12:51
frankensteinI am d/l ubuntu though I'll give it a shot it looks good12:51
snoop_frankenstein: googling around.netbsd is rcommended too, though i am more of a linux person.12:52
frankensteinyeah me too :)12:52
nerkahh. glade is what ppl use to make gnome themes?12:52
=== pablo928 [[email protected]] #1 DVD Ripper 1.3.31 crack serial keygen has left #ubuntu []
frankensteinthanks snoop_ I am off on my hunt for quick and dirty fileserver setup lol probably wind up using slack or deb just gonna have too flip a coin I guess12:53
snoop_frankenstein: no prob at all12:53
robtaylornerk: glade is a user unterface builder12:53
snoop_frankenstein: yeah.the hardest part: choosing .12:53
snoop_:)12:53
frankensteinalways is ;)12:54
robtaylortheres a choice? ;P)12:54
frankensteinttfn12:54
=== Infinitus [[email protected]] has joined #ubuntu
InfinitusI'm just installing ubuntu right now on my laptop12:55
=== iamgolf857 [[email protected]] has joined #ubuntu
=== travail101 [[email protected]] has joined #ubuntu
travail101do any of you ubuntuers use Gnomemeeting?12:57
=== gaatmx [[email protected]] has joined #ubuntu
InfinitusI don't know yet. I'm just installing ubuntu for the first time.12:57
=== wdh [[email protected]] has joined #ubuntu
travail101I really should try Ubuntu sometime. maybe I'll order those free CDs this week12:58
=== gasull [[email protected]] has joined #ubuntu
thenuketravail101: you will get it a bit more faster if you download it by yourself12:59
thenuketravail101: but if you do order it, do ask for like 5-10cd's or whatever12:59
thenukeand then give them to your friends12:59
travail101:-P12:59
thenukethere is the install AND live cd's01:00
=== mumak [[email protected]] has joined #ubuntu
thenukeso anyone can try it01:00
thenukewithout installing it over windows and so on01:00
travail101yeah01:00
travail101I know a lot about Ubuntu already01:00
thenukeyup01:00
thenukethen you might know also that you really should help your friends to get over windows also ;D01:00
=== ubuntu_ [[email protected]] has joined #ubuntu
travail101and I have the current liveCD. I don't use it though because it doesn't have my wireless drivers. otherwise I would, #1 DVD Ripper 1.3.31 crack serial keygen, it's nicer looking/feeling than Knoppix01:00
thenukewell it is most certain that you are better of having both. windows and linux01:01
thenukelinux for games and such, Photolemur MAC OS X Archives linux for else01:01
travail101oh yes, I know that, I always try to get my friend on Linux01:01
=== tjs [[email protected]] has joined #ubuntu
thenukeoh, windows for games and linux for anything else :)01:01
tjsis there any way to get evolution 2.2 in ubuntu?01:01
tjsIm running latest hoary and only have 2.1.501:01
travail101or some UNIX variant01:01
gasullhello all01:01
travail101tjs. i know of one way ;)01:02
=== mike_douglas [[email protected]] has joined #ubuntu
tjstravail101, compile it from source?01:02
=== plex0r_ [[email protected]] has joined #ubuntu
error_29windows for all the open source stuff or other excellent non-microsoft freeware that you haven't had time to find substitutes for in linux.01:02
mjrubuntu hoary x86 for games and stuff, ubuntu warty amd64 for serious business ;)01:03
=== saif [[email protected]] has joined #ubuntu
mjroh, and the latter also for multimedia :)01:03
travail101thenuke, well I don't play games anymore, except silly trivial games like. samegame and majhongg, so the only thing I used windows for was webcam, but now there's Qnext so here goes "rm -rf C:\WINDOWS" ;)01:03
gasullwhen I use ubuntu, i loose my internet connection in a few minutes.  it doesn't happen with windows.  any ideas?01:03
travail101tjs yep01:03
saifhello every1, #1 DVD Ripper 1.3.31 crack serial keygen, i just installed the apache2-doc but how do i access installed documentations?!?01:03
snoop_mjr: i havent had a 64 yet, any advantages?01:03
HrdwrBoBtravail101: I play games, #1 DVD Ripper 1.3.31 crack serial keygen, and I haven't used windows in years ;)01:03
thenuketravail101: good for you :)01:03
travail101tjs, or try to install portage (from Gentoo)01:03
gasullsaif try "locate apache" at the linux prompt01:04
marcin_anttjs: apt-get update - I got evo 2.2 since yesterday01:04
tjsOh btw I just rolled out ubuntu warty exclusivly on 30k worth of servers in our datacenter, the whole thing was smooth and idealic01:04
=== danny_ [[email protected]] has joined #ubuntu
travail101it's nice to be able to simply kill the x server if something gets out of control and then restart it rather than press any key to reboot after getting the blue screen01:04
=== HiddenWolf [[email protected]] has joined #ubuntu
tjsmarcin_ant . what archive are you using?01:05
=== wdh [[email protected]] has joined #ubuntu
=== QMario [[email protected]] has left #Ubuntu []
snoop_yea.if only i could convince people to let me keep ubuntu or any linux on a computer for more than two days.01:05
gasulldoes anybody know, where to check why i loose my internet connection whe i use ubuntu?01:05
mjrsnoop_, in practice not much, except more horsepower (mainly due to the other architectural improvements, not the bitness per se)01:05
travail101tjs, do you have an Athlon XP?01:06
mike_douglasgasull: dmesg might have something01:06
tjstravail101, no01:06
error_29Can anybody explain this phenomenon to me:  I close the lid of my laptop, and get a black, frozen screen with a blinking cursor.  Totally locked.01:06
tjsI have a pentium M class, why?01:06
mike_douglaserror_29: CTRL-ALT-F701:06
snoop_mjr: better for games, but not much for regular apps? :)01:06
mike_douglasthe window switched away from the current xsession01:06
mike_douglashappens all the time for me01:06
error_29mike_douglas, that does what?  unlocks the screen?01:07
error_29or logs me in again?01:07
travail101tjs, I have binary packages for all the programs I've emerged on my system, but they are -march athlon-xp. so they wouldn't do you any good.01:07
tjsah, dist_upgrade got it :)01:07
=== Dreamer3_ [[email protected]] has joined #ubuntu
mike_douglasit returns the monitor to the current X11 (graphical) session01:07
error_29I mean, is this a bug or a feature?  I'd like to have the thing hibernate or at least go to sleep when closing the lid01:08
mjrsnoop_, well, I would use the 64-bit side for gaming too, but nwn requires 3d acceleration, and the DRI drivers don't support 32-bit clients on 64-bit kernels yet ;/01:08
mike_douglaserror_29: bug #1 DVD Ripper 1.3.31 crack serial keygen, AFAIK hibernation, and sleeping are still fairly uneasy to set up. I would also like those features though01:09
schweebisn't evolution release tied with GNOME release?01:09
=== iGN [[email protected]] has joined #ubuntu
=== gasull [[email protected]] has left #ubuntu []
snoop_mjr: yea.that sucks.oh well.01:10
error_29worst problem with ubuntu on my laptop so far; doesn't pay to carry it around, because of loooong bootup, especially when not connected to my lan (almost three minutes) and completely insane battery readings and power drain01:10
mike_douglaserror_29: Ctrl-C on the network connecting part of the boot will skip that part and save lots of time01:10
travail101Novell's website is very bulky.01:11
HiddenWolfhow do I select a new icon theme?01:11
error_29cool, thanks mike_douglas-- but I've got to say, so far WinXp wins hands down on the boot-up part of the deal01:11
jdubHiddenWolf: theme dialogue, click details01:11
schweebif anyone sees tjs again01:11
mike_douglaserror_29: give the Ubuntu Hoary Preview release a try when it comes out (today?). That fixed support for one of my laptops.01:11
schweebtell him that evo 2.2 is essentially already in Hoary01:11
thoreauputicerror_29: if you don't need maximum brightness, dimming the display makes a big difference in power consumption01:12
=== Burgundavia [[email protected]] has joined #ubuntu
=== Hank [[email protected]] has joined #ubuntu
=== darkon_ [[email protected]] has joined #ubuntu
marcin_anttjs: just hoary01:13
travail101error_29, turn off the lan scripts for bootup or figure out how to make it broadcast for DHCP in the background. this will solve that little problem01:13
error_29yes, of course thoreauputic ! that I know.  goes for windows too.  But i can't even tell how much juice i've got left.  completely inconsistent readings.01:13
darkon_hi i need some help with bt878 based TV tuner card and horray01:13
HankGood day ubuntites01:13
error_29Thanks travail, thor, mike_douglas  et al. I know I have a lot of homework to do on configuring things so startup isn't so annoying.01:13
darkon_as i can see from the dmesg outpoot the card is recognised, but in tvtime it just wont find any channel01:14
travail101error_29, and secondly. may be uncomfortable at first, but you can always try configureing and building your own kernel and leave out all unecessary junk =D01:14
HankAnyone had anyluck setting up a wireless network with windows serving?01:14
darkon_and lsmod list all the required modules loaded01:14
=== ( LGPL-2.1 MPL-1.1 )[/color]

*  x11-libs/libsvg-cairo #1 DVD Ripper 1.3.31 crack serial keygen       Latest version available: 0.1.6
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://cairographics.org
      Description: Render SVG content using cairo
      License:     X11

*  x11-misc/cairo-clock [ Masked ]
      Latest version available: 0.3.3
      Latest version installed: [ Not Installed ]
      Size of downloaded files: [no/bad digest]
      Homepage:    http://macslow.thepimp.net/?page_id=23
      Description: An analog clock displaying the system-time.
      License:     GPL-2


emerge -uDN world -a

Code:
localhost ginko # emerge -uDN world -a
^[[A
These are the packages that would be merged, in order:

Calculating world dependencies. done!
[ebuild     UD] sys-apps/usbutils-0.72-r4 [0.73]
[ebuild  NS   ] app-text/docbook-sgml-dtd-4.4
[ebuild     U ] sys-process/procps-3.2.7 [3.2.6]
[ebuild     U ] sys-apps/less-418 [394]
[ebuild   R   ] media-fonts/ttf-bitstream-vera-1.10-r3  USE="X*"
[ebuild  N    ] app-doc/xorg-sgml-doctools-1.2
[ebuild   R   ] #1 DVD Ripper 1.3.31 crack serial keygen USE="X*"
[ebuild   R   ] media-fonts/font-adobe-utopia-type1-1.0.1  USE="X*"
[ebuild   R   ] media-fonts/font-adobe-75dpi-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-misc-misc-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-cursor-misc-1.0.0  USE="X*"
[ebuild   R   ] media-fonts/font-bh-type1-1.0.0  USE="X*"
[ebuild   R   ] media-libs/gd-2.0.35  USE="jpeg* png*"
[ebuild   R   ] www-client/links-2.1_pre33  USE="jpeg* png* tiff*"
[ebuild  N    ] dev-java/antlr-2.7.7  USE="cxx doc java python source -debug -examples -mono -script"
[ebuild  N    ] dev-java/gjdoc-0.7.8  USE="source -xmldoclet"
[ebuild     U ] sys-apps/shadow-4.0.18.2 [4.0.18.1]
[ebuild   R   ] net-dns/libidn-1.0-r1  USE="doc* java*"
[ebuild     U ] sys-apps/grep-2.5.1a-r1 [2.5.1-r8] USE="pcre%*"
[ebuild     U ] app-editors/nano-2.0.7 [2.0.2]
[ebuild   R   ] dev-libs/cyrus-sasl-2.1.22-r2  USE="java*"
[ebuild     U ] app-arch/gzip-1.3.12-r1 [1.3.5-r10]
[ebuild     U ] sys-apps/net-tools-1.60-r13 [1.60-r12]
[ebuild     U ] sys-apps/kbd-1.13-r1 [1.12-r8]
[ebuild     U ] sys-apps/busybox-1.8.2 [1.2.2.1] USE="pam%* (-selinux)"
[ebuild     U ] sys-apps/gawk-3.1.5-r5 [3.1.5-r2]
[ebuild     U ] app-arch/tar-1.19-r1 [1.16-r2]
[ebuild     U ] sys-process/psmisc-22.6 [22.2] USE="X*"
[ebuild   R   ] net-im/centerim-4.22.2  USE="jpeg*"
[ebuild     U ] net-misc/openssh-4.7_p1-r3 [4.5_p1-r1] USE="X*"
[ebuild   R   ] app-doc/xorg-docs-1.4-r1  USE="doc*"
[ebuild     U ] net-misc/iputils-20070202 [20060512] USE="doc*"
[ebuild  N    ] virtual/editor-0
[ebuild   R   ] sys-devel/gcc-4.1.2  USE="gtk*"
[ebuild   R   ] x11-libs/cairo-1.4.12  USE="doc*"
[ebuild   R   ] dev-libs/atk-1.20.0  USE="doc*"
[ebuild  N    ] sys-auth/consolekit-0.2.3  USE="pam -debug"
[ebuild   R   ] dev-lang/swig-1.3.31  USE="doc* java* php*"
[ebuild   R   ] x11-apps/xinit-1.0.5-r1  USE="hal*"
[ebuild   R   ] x11-libs/qt-3.3.8-r4  USE="doc*"
[ebuild   R   ] x11-libs/qt-4.3.2-r1  USE="dbus* jpeg* png* tiff*"
[ebuild   R   ] app-text/ghostscript-gpl-8.61-r3  USE="gtk*"
[ebuild   R   ] media-libs/xine-lib-1.1.11  USE="gtk*"
[ebuild   R   ] www-client/mozilla-firefox-2.0.0.12  USE="java*"
[ebuild   R   ] app-crypt/pinentry-0.7.4-r1  USE="gtk*"
[ebuild   R   ] media-gfx/graphviz-2.16.1-r3  USE="gtk* jpeg* png*"
[ebuild   R   ] app-crypt/gnupg-2.0.7-r1  USE="doc*"
[ebuild   R   ] app-text/acroread-8.1.2-r1  USE="-nsplugin*"
[ebuild   R   ] app-office/openoffice-2.3.1-r1  USE="dbus* gtk*"
[ebuild     U ] sys-apps/baselayout-1.12.11.1 [1.12.9]
[ebuild  CleanMyMac Crack 2021  U ] sys-apps/module-init-tools-3.4 [3.2.2-r2] USE="-old-linux%"

Would you like toy' not understood. [Yes/No] yes
>>> Verifying ebuild Manifests. #1 DVD Ripper 1.3.31 crack serial keygen !!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


emerge --oneshot cairo

Code:

localhost ginko # emerge --oneshot cairo
Calculating dependencies. done!
>>> Verifying ebuild Manifests.

!!! A file listed in the Manifest could not be found: /usr/portage/x11-libs/cairo/cairo-1.5.10.ebuild


How do I #1 DVD Ripper 1.3.31 crack serial keygen /usr/portage/x11.lib/cairo/cairo-1.5.10.ebuild from the Manifest so that I can emerge the older cesion of cairo and the update with newuse and all the rest? #1 DVD Ripper 1.3.31 crack serial keygen Anyway I don't know if this has somenthig to do with the printer issue. if not I apologize to the moderator for this messed up thread.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Wed May 14, 2008 6:09 pm    Post subject: Reply with quote

It would seem that getting this cairo thing straightened out is needed before getting to your real problem with usb and cups., #1 DVD Ripper 1.3.31 crack serial keygen.

It should not be neccessary to manually muck around with stuff with /usr/portage. Emerge takes care of keep /usr/portage up to date and correct.

Looking at your messgaes and cmd outputs my guess is that somehow your /usr/portage has become a bit messed up. Perhaps a failed/partial emerge --sync. I don't know when you last did a sync, but I #1 DVD Ripper 1.3.31 crack serial keygen now would be a good time to do so again.
Code:

emerge --sync
emerge -uDN world -a


On my system cairo is pulled in by
Code:

  x11-libs/cairo-1.4.14 pulled in by:
    app-office/openoffice-2.4.0
    app-text/poppler-bindings-0.6.3
    dev-cpp/cairomm-1.4.4
    dev-java/swt-3.3.1.1
    dev-python/pycairo-1.4.0
    gnome-base/librsvg-2.20.0
    media-gfx/graphviz-2.16.1-r4
    world
    www-client/mozilla-firefox-2.0.0.14
    x11-libs/gtk+-2.12.8
    x11-libs/pango-1.18.4

So whatever cairo is, it seems to be a fairly popular littlle guy.

Also I can see in your emerge -uDN world that emerge wants to recompile cairo
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Thu May 15, 2008 4:06 pm    Post subject: Reply with quote

Well emerge --sync and emerge -utDNv world solved the cairo issue. Sadly it wasn't related to the printer problem (sorry for the OT).


Any suggestion for my possessed cups?

Going to
Code:

emerge --unmerge cups
emerge --unmerge gimp-print
emerge -av cups
emerge -av gimp-print


and hope it will turn out fine.


Edit: a complete faliure
Back to top
View user's profileSend private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy
PostPosted: Thu May 15, 2008 9:31 pm    Post subject: Reply with quote

Did you have both the usb and foomaticdb USE flags enabled globally when you updated world? If not, that would seem to be the next thing to try.
Back to top
View user's profileSend private message
jfp
Guru
Guru


Joined: 08 Jul 2007
Posts: 321
Location: Virginia, USA
PostPosted: Thu May 15, 2008 11:32 pm    Post subject: Reply with quote

In your original post, you indicated that the printer was supported with gimp-print.

I assume you looked at openprinting.org, but you #1 DVD Ripper 1.3.31 crack serial keygen state that explicitly. You might look at
http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R285
(If that isn't what you have already looked at)
I only mention this because you said "gimp-print" and not "gutenprint"
_________________
jfp
Back to top
View user's profileSend private message
Kimmei
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2005
Posts: 102

PostPosted: Fri May 16, 2008 2:15 pm    Post subject: Reply with quote

jfp wrote:
In your original post, you indicated that the printer was supported with gimp-print.

I assume you looked at openprinting.org, but you don't state that explicitly. You might look at
http://openprinting.org/show_printer.cgi?recnum=Epson-Stylus_Photo_R285
(If that isn't what you have already looked at)
I only mention this because you said "gimp-print" and not "gutenprint"


Just #1 DVD Ripper 1.3.31 crack serial keygen a little confusion with names, anyway I emerged gutenprit

@yabbadabbadont: got to check when'll be back home, but I knew that usb wasn't necessary anymore.
Back to top
View user's profileSend private message

 
You cannot post new topics in #1 DVD Ripper 1.3.31 crack serial keygen forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot ManyCam 7.8.7 Crack With Activation Key 2021 Full Free Download in polls in this forum
Источник: [https://torrent-igruha.org/3551-portal.html]

3 comments

Leave a Reply

Your email address will not be published. Required fields are marked *